Pinpoint Test G543314P3 : Idle Boom/Shake/Vibration/Shudder

PINPOINT TEST G543314p3 : IDLE BOOM/SHAKE/VIBRATION/SHUDDER

G543314t5 : CHECK CABLE/HOSES
1. Check the engine compartment for any component that may be grounding between the engine and body or chassis. Example: air conditioning (A/C) hoses.

- Are the components OK?

-> YES
GO to Pinpoint Test G543314t16.

-> NO
CORRECT the condition. REPEAT the Road Test as outlined.

G543314t16 : CHECK INTAKE AIR DISTRIBUTION AND FILTERING SYSTEM
1. Check the intake air distribution and filtering system for loose/damaged components (primarily upstream of the Mass Air Flow (MAF) sensor).

- Are the components OK?

-> YES
GO to Pinpoint Test G543314t6.

-> NO
CORRECT the condition. REPEAT the road test as outlined.

G543314t6 : CHECK THE STEERING WHEEL DAMPER
1. Remove the driver air bag module and visually inspect the steering wheel damper for correct installation or any touch condition.

- Is the damper OK?

-> YES
GO to Pinpoint Test G543314t7.

-> NO
CORRECT the condition. REPEAT the Road Test as outlined.

G543314t7 : CHECK THE COOLING RADIATOR
1. Check the engine cooling radiator mountings and bushings for security and condition. Check the radiator installation for any component that may have a touch condition.

- Are the installation and bushings OK?

-> YES
GO to Pinpoint Test G543314t8.

-> NO
CORRECT the condition. REPEAT the Road Test as outlined.

G543314t8 : CHECK THE EXHAUST SYSTEM
1. Carry out the exhaust system neutralizing procedure in this section.

- YES
CHECK and INSTALL new engine/transmission mounts as necessary. REPEAT Road Test as outlined.

- NO
REPAIR as necessary. REPEAT Road Test.