Exhaust System: Service and Repair

Exhaust System

Removal
1. Remove both muffler and tailpipes.
2. Remove the air deflector.
3. Support the exhaust system with suitable stands.






4. NOTE:
- Right-hand shown, left-hand similar.
- Disconnect the heated oxygen sensor (HO2S) electrical connector.






5. NOTE:
- Right-hand shown, left-hand similar.
- Disconnect the catalyst monitor sensor electrical connector.






6. NOTE:
- Right-hand shown, left-hand similar.
- Detach the catalyst monitor sensor.






7. NOTE:
- Right-hand shown, left-hand similar.
Detach the catalytic converter.






8. Remove the exhaust system.

Installation






1. NOTE:
- Right-hand shown, left-hand similar.
- To install, reverse the removal procedure.
- Tighten to 40 Nm.