Pinpoint Test G426404P6

PINPOINT TEST G426404p6 : DTC B2513: BLOWER MOTOR CONTROL MODULE CIRCUIT TEST

G426404t22 : CHECK THE REAR BLOWER MOTOR CONTROL MODULE CIRCUIT FOR OPEN CIRCUIT
1. Disconnect the battery negative terminal.
2. Disconnect the rear climate control module connector RA01.
3. Disconnect the rear blower motor control module connector RA03.
4. Measure the resistance between the rear climate control module connector RA01, pin 14 (W) and the rear blower motor control module connector RA03, pin 02 (W).

- Is the resistance greater than 5 ohms?

-> YES
REPAIR the high resistance circuit. CLEAR the DTC. TEST the system for normal operation.

-> NO
INSTALL a new rear blower motor control module. CLEAR the DTC. TEST the system for normal operation. If the DTC is repeated, INSTALL a new rear climate control module.