Cylinder Head Assembly: Specifications

Cylinder Head Torque & Sequence / Bolt re-usability Service and Repair









Surface Variation -- Head-to-block, Head-to-manifolds And Surface Variation -- Warpage

Cylinder head maximum permitted warp (mm) 0.125






Camshafts LH

Install the camshaft bearing caps.
Evenly and progressively tighten the bolts in the sequence shown to 10 Nm (7 lb.ft).












Camshafts RH

Install the camshaft bearing caps.
Evenly and progressively tighten the bolts in the sequence shown to 10 Nm (7 lb.ft).





Intake Manifold Specifications

Exhaust Manifold Specifications

Camshaft Gear/Sprocket Specifications