Rear Fog and Reversing Lamp [Vehicles Without: Convertible Top]

Rear Fog and Reversing Lamp

Removal
1 Remove the liftgate lower trim panel. For additional information, refer to Liftgate Lower Trim Panel Liftgate Lower Trim Panel




2 Remove the fog and reversing lamp.
- Remove the 3 plastic nuts.
- Disconnect the electrical connector.

Installation
1 Install the fog and reversing lamp.
- Connect the electrical connector.
- Install the plastic nuts.
2 Install the liftgate lower trim panel. For additional information, refer to Liftgate Lower Trim Panel Liftgate Lower Trim Panel