Horn: Service and Repair

Horn

Removal
1 Open the hood.




2 Remove the fan cowl.
- Remove the 15 clips.




3
NOTE:
Note the fitted position.
Remove the horn assembly.
- Release the clip and position the wiring harness aside for access.
- Disconnect the electrical connector.
- Remove the stud.

Installation
1 Install the horn assembly.
- Connect the electrical connector.
- Tighten the stud to 25 Nm (18 lb.ft).
- Secure the electrical harness with the clip.
2 Install the fan cowl.
- Secure with the clips.