Fuel Charging and Controls 1

Fuel Charging and Controls

COMPONENT LOCATIONS









INTRODUCTION
The major components of the fuel charging and control system comprise a fuel pump and FPDM (fuel pump driver module), fuel rails and eight injectors. The fuel pump supplies fuel from the tank, via a pipe routed along the side of the transmission, to the fuel rail. The fuel rail distributes the fuel equally to each of the 8 injectors. The fuel injectors, which are controlled by the Engine Management System (EMS), are installed in the fuel rails on each side of the air intake manifold. A cross over pipe connects the 2 fuel rails together at the front of the engine.For additional information, refer to Fuel Tank and Lines
For additional information, refer to Electronic Engine Controls Electronic Engine Controls