Maintenance Required Lamp/Indicator: Service and Repair
Message Center Reset ProcedureTo reset the service interval indicator, the following process switch presses must each be carried out within 3 seconds:
- With the vehicle in power mode 0, (ignition off) press and hold the rear fog lamp switch.
- Allow the vehicle to enter power mode 6 (press the start button without a foot on the brake).
- Immediately release the rear fog lamp switch.
- Press and hold the trip computer cycle switch.
- Press and hold the rear fog lamp switch.
- Continue to hold the trip computer and rear fog lamp switches.
- If the process has been successful, the message center will display 'RESETTING SERVICE MODE' and then display 'SERVICE MODE RESET' after 10 seconds.
- Release both switches and return the vehicle ignition to off, power mode 0.