Horn: Description and Operation

Horn

COMPONENT LOCATION









INTRODUCTION
The vehicle horns are operated by pressing the center of the steering wheel. Two horns are fitted to the vehicle; a high tone horn and a low tone horn. Voltage supply to the horns is controlled by the horn relay, which is energized when the horn switch is pressed.
The horn relay is located in the power distribution box and when energized provides a supply to both horns simultaneously. Circuit protection is provided by fuse 10 (15A), which is also located in the power distribution box.
The horns are mounted on a bracket, which is secured to the center of the front bumper beam, and are also used by the active anti-theft system. For additional information, refer to Anti-Theft - Active Anti-Theft - Active

CONTROL DIAGRAM

NOTE:
A = Hardwired