Front Impact Severity Sensor

Front Impact Severity Sensor

Removal

NOTE:
The LH front impact severity sensor is illustrated, removal of the RH sensor is a similar procedure.
1 Open the hood.




2 Remove the fan cowl.
- Remove the 15 clips.




3 Remove the front impact severity sensor.
- Remove the 2 bolts.
- Disconnect the electrical connector.

Installation
1 Install the front impact severity sensor.
- Connect the electrical connector.
- Tighten the bolts to 8 Nm (6 lb.ft).
2 Install the fan cowl.
- Secure with the clips.