Side Impact Sensor [2-Door]

Side Impact Sensor

Removal
1 Remove the rear quarter trim panel. For additional information, refer to Rear Quarter Trim Panel - Vehicles Without: Convertible Top Rear Quarter Trim Panel [2-Door]




2 Remove the side impact sensor.
- Remove the 2 bolts.
- Disconnect the electrical connector.

Installation
1 Install the side impact sensor.
- Tighten the bolts to 10 Nm (7 lb.ft).
- Connect the electrical connector.
2 Install the rear quarter trim panel. For additional information, refer to Rear Quarter Trim Panel - Vehicles Without: Convertible Top Rear Quarter Trim Panel [2-Door]