Trunk / Liftgate: Service and Repair

Luggage Compartment Lid

Removal

NOTE:
Removal steps in this procedure may contain installation details.

1
CAUTION: Make sure to protect the paintwork.
NOTE:
The luggage compartment lid is manufactured from aluminium.
NOTE:
The luggage compartment lid is serviced as a separate bolt-on panel, less its hinges.

2 For additional information, refer to Health and Safety Precautions Health and Safety Precautions
3 For additional information, refer to Body Repairs
4 For additional information, refer to Corrosion Protection
5 For additional information, refer to Body and Frame
6 For additional information, refer to Battery Disconnect and Connect Battery Disconnect and Connect
7 For additional information, refer to Luggage Compartment Lid Latch Actuator Service and Repair

9
NOTE:
The step must be carried out on both sides.

10
WARNING: This step requires the aid of another technician.
CAUTION: Take extra care not to damage the wiring harnesses.
TORQUE: 23 Nm

11
CAUTION: Protect the surrounding paintwork to avoid damage.
NOTE:
Do not disassemble further if the component is removed for access only.

Installation
1 To install, reverse the removal procedure.