B2255

B2255-OCCUPANT RESTRAINT CONTROLLER ROLL OVER FEATURE DISABLE

WHEN MONITORED
With the ignition on. The module's on board diagnostics continuously performs internal circuit tests.

SET CONDITION
This DTC will set if the ORC Roll Over Feature has been disabled via the scan tool.

POSSIBLE CAUSES
- Occupant restraint controller

Diagnostic Test

1. OCCUPANT RESTRAINT CONTROLLER ROLL OVER FEATURE DISABLED

Turn the ignition on.
With the scan tool read the ORC Roll Over Feature status Enabled or Disabled.

Q: Does the scan tool show Roll Over Feature Disabled?

Repair
Perform AIRBAG SYSTEM VERIFICATION TEST - VER 1. Supplemental Restraints Verification Test