C2204

C2204-SENSOR CLUSTER INTERNAL









When Monitored:

With the ignition on.

Set Condition:

If the Anti-Lock Brakes Module detects that the Yaw or Lateral Sensor signal is out of range.

Possible Causes

- DYNAMICS SENSOR

CHECK FOR A DTC C2204-SENSOR CLUSTER INTERNAL

NOTE: The Sensor Cluster is the same as the Dynamics sensor. If present, diagnose and repair DTC C123C-DYNAMICS SENSOR MOUNTING/INSTALLATION PERFORMANCE before diagnosing this DTC.

1. Turn the ignition on.
2. With the scan tool, read DTCS.
3. With the scan tool, read and record Environmental Data to help identify the conditions in which the DTC was set.
4. With the scan tool, erase DTCs.

WARNING: Make sure brake capability is available before road testing.

5. Test drive the vehicle.
6. With the scan tool, read DTCs.

Does the scan tool display: C2204-SENSOR CLUSTER INTERNAL?

Yes

- Replace the Dynamics Sensor.
- Perform ABS VERIFICATION TEST

No

- Perform the INTERMITTENT CONDITION TEST