B1A24

B1A24-KEY NOT PROGRAMMED

For a complete wiring diagram refer to Diagrams/Electrical.

- When Monitored:

With the ignition switch on.





Diagnostic Test

1. KEY NOT PROGRAMMED

Turn the ignition on.

Using a scan tool, attempt to program the key(s) into the SKREEM.

Was the programming of the key(s) successful?

Yes

- Programming of the key(s) were successful. Test complete.
- Perform SKREEM VERIFICATION TEST. Vehicle Theft Security Verification Tests

No

- Replace the ignition key and attempt to program it into the SKREEM. If the DTC resets, replace and program the SKREEM.

NOTE: If this vehicle is equipped with a Steering Column Lock Module, it must be replaced along with the SKREEM.

- Perform SKREEM VERIFICATION TEST. Vehicle Theft Security Verification Tests