Oil Pressure Sensor: Service and Repair

Engine, 5.7LILubrication/SENSOR, Oil Pressure/removal

1. Disconnect and isolate the negative battery cable.
2. Raise and support the vehicle.






3. Remove the lower splash shield retaining bolts (1) and the splash shield.






4. Disconnect the oil pressure sensor electrical connector (1).






5. Remove the oil pressure sensor (1).

Engine, 5.7LILubrication/SENSOR, Oil Pressure/installation

INSTALLATION

NOTE: Apply Mopar� Thread Sealant with PTFE to the sensor threads before installing into the engine block.






1. Install the oil pressure sensor (1).






2. Connect the oil pressure sensor electrical connector (1).






3. Position the lower splash shield and install the retaining bolts (1).
4. Lower the vehicle
5. Connect the negative battery cable.