Crankshaft, Engine

Crankshaft


Main journal diameter 58.409-58.422 mm (2.2996-2.3001 in)
Minimum regrind diameter 57.393-57.406 mm (2.2596-2.2601 in)
Crankpin journal diameter 50.800-50.812 mm (2.0000-2.0005 in)
Minimum regrind diameter 49.784-49.797 mm (1.9600-1.9605 in)
Crankshaft end thrust (end float)
Taken on thrust washers of
centre main bearing 0.10-0.20 mm (0.004-0.008 in)