Fuel Filter: Service and Repair

CAUTION: Spilling fuel is unavoidable during this operation. Be sure all necessary precautions are taken to prevent fire and explosion.


REMOVE
1. Depressurize fuel system. Fuel Pressure Release
2. Access to filter is gained through right hand rear wheel arch.
3. Clean area around hose connections to prevent ingress of foreign matter into fuel system. Clamp inlet and outlet hoses to prevent fuel spillage when disconnecting hoses.

Fuel Filter:

4. Loosen two fuel line unions and remove hoses. Plug ends of hoses to prevent ingress of dirt.
5. Release securing bolt and bracket and remove filter from chassis side member.

REFIT
1. Fit a new filter observing direction of flow arrows stamped on canister.
2. Tighten securing nut and bolt.
3. Fit inlet and outlet hoses. Tighten to 3ONm (22 ft lb).
4. Refit fuel pump relay module, reconnect battery.
5. Start engine and inspect for fuel leaks around hose connections.