Time-Out Feature

Time-Out Feature

Fuse E6 applies voltage to the Window Lift ECU terminal 4 when the ignition switch is on. When the ignition switch is turned off, the absence of voltage at terminal 4 signals the Window Lift ECU to start the timeout feature. When the timeout feature is activated, the Window Lift ECU will allow window and sunroof operation for an additional 45 seconds.

The timeout feature will be cancelled if the driver's door is opened and then closed on all models except NAS models. On NAS models, the feature is cancelled as soon as any door is opened. The Window Lift ECU monitors the door's position at terminal 14.

If Window Lift ECU terminals 8 and 13 are not connected together, the system operates in the NAS mode.