Heated Washer Jets and Low Water Indicator
Heated Washer Jets and Low Water Indicator
Operation
The heated washer jets and low water indicator circuit is provided with power via Fuse B4 and the ignition load relay 4. The water level indicator has a direct feed from the ignition load relay and the heated washer jets are supplied by Fuse E4.
Low Water Indicator
The low water monitor 6 which is located in the water bottle, consists a magnetic float which will close the switch contacts and provide a ground for the warning indicator 5, when the water level falls.
Heated Jets
To prevent freezing of the washer jets 7, both jets are fitted with heating elements which are automatically grounded by the thermostat 8 when the temperature nears freezing. The thermostat which is located at the right hand end of the radiator grill is shown in operation in 8A.