Power Mirrors

When the Ignition Switch (X134) is in position II, voltage is supplied to the power mirrors circuit by fuse F E2.

Right/Down Movement
When the Mirror Adjustment Switch (X146) is in the RIGHT or DOWN position, voltage is applied to the selected Mirror Actuator (M115, M123) at terminal 4 through the Mirror Adjustment Switch, the SW wire, and the Mirror Changeover Switch (X192). The selected Mirror Actuator is grounded at E200 through the PR wire, the SLG wire, the "Left/Up" contacts of the Mirror Adjustment Switch and the B wire. The mirrors now move.

If the DOWN position is selected, the "Up/Down" contacts in the Mirror Adjustment Switch close to apply voltage to a solenoid in the Mirror Actuator through the WP wire. The solenoid energizes because it is grounded at E200 or E201 through the B wire. The energized solenoid engages the motor in the actuator with the up/down gearbox.

Left/Up Movement
When the Mirror Adjustment Switch (X146) is in the LEFT/UP position, voltage is applied to the selected mirror through the Mirror Adjustment Switch and the SLG wire. The selected Mirror Actuator (M115, M123) is grounded at E200 through the PW wire, the Mirror Change over Switch (X192), the "Right/Down" contacts of the Mirror Adjustment Switch and the B wire. The Mirror Actuator now runs.

When the UP position is selected, the "Up/Down" contacts of the Mirror Adjustment Switch close to energize the Mirror Actuator solenoid. When the solenoid is energized, it engages the up/down gearbox.