Fuel Pump: Service and Repair

*** FOR ADDITIONAL INFORMATION NOT INCLUDED HERE, REFER TO TSB # TEC860996, DATED OCTOBER 11, 1996 ***

CAUTION: Before disconnecting any part of fuel system, it is imperative that all dust, dirt and debris is removed from around components to prevent ingress of foreign matter into fuel system.

REMOVE
1. Disconnect battery.
2. Remove fuel tank.

Fuel Pump Removal:

3. Disconnect fuel and breather pipes from pump/sender unit.
4. Using special tool LRT-19-001, remove fuel pump retaining ring.
5. Withdraw pump/sender unit from tank.

REFIT
1. Refit in reverse order of removal.