Glass Panel Assembly

Glass Panel Assembly

Service Repair No - 76.82.64

Remove
1. Open the sunroof to the TILT position.
2. Remove mechanism covers. Slide rearwards to disengage from location and lift out.
3. Remove two screws from each side as shown.
4. Remove glass sunroof.

Glass Sunroof Assembly:

Refit and Adjust
5. Fit glass sunroof
6. Fit four screws but do not tighten.
7. Close sunroof.
8. Check the height of the sunroof panel against the roof aperture. The trimmed edge of the glass sunroof should stand 1 mm proud of the roof aperture.
9. Adjust by moving sunroof panel up or down. Tighten screws.
10. Fit mechanism covers.
11. Check sunroof operates correctly.