Fluid Cooler Replacement
REMOVAL1. Disconnect battery negative lead.
2. Remove engine oil cooler.
3. Remove 4 trim studs securing air deflectors. Remove deflectors.
4. Position container to collect fluid spillage.
5. Unscrew fluid pipe union nuts. Collect O-rings and discard.
6. Plug pipes and connections.
7. Remove 4 bolts securing cooler to radiator bracket.
8. Remove cooler.
INSTALLATION
9. Install cooler
10. Install and tighten 4 bolts securing cooler to mounting bracket.
11. Remove plugs from cooler and pipes.
12. Ensure pipe unions are clean.
13. Lubricate new O-rings seals with clean fluid. Install seals to pipes.
14. Connect pipes to cooler. Tighten union nuts to Tighten to 30 Nm (22 ft. lbs.).
15. Remove container.
16. Install air deflectors and secure with studs.
17. Install engine oil cooler.
18. Reconnect battery negative lead.
19. Top up gearbox fluid.