Headlamp Wiper Blade: Service and Repair

Headlamp Wiper Blade, Arm and Washer Jet

Service Repair No - 84.25.06 - Blade
Service Repair No - 84.25.02 - Arm

Blade
1. Lift wiper arm away from headlamp.
2. Remove wiper blade.





Arm and Washer let Assembly
3. Lift cover. Remove nut securing arm to spindle.





4. Disconnect hose from washer jet.
5. Remove wiper arm/jet assembly from spindle.





Refit
6. Connect washer tube to jet.
7. Ensure wiper arm is in 'park' position.
8. Position wiper arm to spindle. Set wiper arm horizontal.
9. Secure wiper arm with nut. Tighten to 10 Nm (7 ft. lbs.). Secure cover.

Blade
10. Clip blade into wiper arm.