Instrument Cluster / Carrier: Service and Repair

INSTRUMENT PANEL FINISHER

Remove
1. Position steering wheel for access.







2. Remove 2 screws securing panel.
3. Lift panel clear, disconnect multiplug connections.

Refit
4. Reverse removal procedure.




INSTRUMENT BINNACLE (panel)

Remove
1. Remove instrument panel finisher.







2. Remove 4 screws securing binnacle to fascia.
3. Carefully ease 2 lower panel finisher brackets downwards.
4. Withdraw binnacle to gain access to multiplugs.
5. Noting their fitted positions, disconnect multiplugs.
6. Remove binnacle.

Refit
7. Reverse removal procedure.




INSTRUMENT COWL AND ILLUMINATION BOARD

Remove
1. Remove Instrument binnacle.

Instrument cowl







2. Remove bulb holder from binnacle.
3. Release 4 clips securing top of cowl to binnacle
4. Release 3 clips securing bottom of cowl to binnacle, remove cowl.

Illumination board
5. Release bulb holder wires from clip.
6. Remove screw securing illumination board to cowl, remove board.

Refit

Illumination board
7. Position illumination board to cowl, fit and tighten screw.
8. Secure bulb holder wires in clip.

Instrument cowl
9. Ensure instrument face plate is correctly positioned.
10. Position cowl to binnacle ensuring speedometer trip passes through hole in cowl.
11. Secure cowl retaining clips.
12. Fit bulb holder in binnacle.
13. Fit binnacle.