Water Pump: Service and Repair

WATER PUMP
Service repair no - 26.50.01


Remove
1. Drain cooling system.
2. Remove cooling fan.





3. Slacken water pump pulley bolts.
4. Release tension from water pump drive belt. Remove belt.
5. Remove water pump pulley.





6. Remove 9 bolts securing water pump.
7. Remove water pump and gasket.


Refit
8. Ensure mating faces are clean.
9. Fit water pump with new gasket.
10. Position water pump. Secure with bolts. Tighten to 22 Nm (16 ft. lbs.)
11. Fit water pump pulley. Secure with bolts. Tighten to 22 Nm (16 ft. lbs.)
12. Fit water pump drive belt.
13. Fit cooling fan.
14. Fill cooling system.