Rubbing Strips and Door Finishers

Remove

CAUTION: When removing exterior trim, NEVER lever directly against body panels. Use an approved trim fork. Protect body panel with suitable material, such as fabric covered hardboard.

Rubbing Strip - Front Fender
1. Remove relevant wheel arch liner.
2. Remove nut securing forward edge of rubbing strip.
3. Remove rubbing strip from single clip.

Rubbing Strip - Rear Quarter Panel
4. Release 5 clips securing rubbing strip. Remove strip.

NOTE: Rearmost clip is unique.

Rubbing Strips - Front & Rear Doors
5. Remove nut securing rear of rubbing strip.
6. Front Door Rubbing Strip: Release 5 clips securing rubbing strip.
7. Rear Door Rubbing Strip: Release 3 clips securing rubbing strip.
8. Remove rubbing strips.

Lower Door Finishers
9. Remove screw securing rear of fininsher.
10. Front Door Finisher: Release 5 clips securing rubbing strip.
11. Rear Door Finisher: Release 3 clips securing rubbing strip.
12. Remove finishers.

Refit
13. Reverse removal procedure.