Bladder - Lumbar Support - Front Seat - From 99MY

BLADDER - LUMBAR SUPPORT - FRONT SEAT - From 99MY

Remove

1. Remove squab cover and squab foam as an assembly.







2. Disconnect lumbar pump multiplug.
3. Release 8 clips securing squab diaphragm and bladder assembly to squab frame.
4. Remove diaphragm and bladder assembly. Do not carry out further dismantling if component is removed for access only.







5. Noting position of retention wire and hog rings securing wire to diaphragm, remove hog rings and retention wire.

Refit

6. Position retention wire to diaphragm and secure with hog rings.

WARNING: Position and security of retention wire is critical for effective airbag performance.

7. Position diaphragm assembly and secure clips.
8. Connect lumbar pump multiplug.
9. Fit squab cover.