Tool Numbers

NOTE:
^ Use the following special service tools or an equivalent.
^ Service tools may be obtained direct from the manufacturers:
V.L. Churchill
P.O. Box No3
London Road
Daventry, Northants, NN11.4NF.
England.

Crankshaft Rear Oil Seal
Replacer tool No. LRT-12-091, or equivalent
Protection Sleeve tool No. LRT-12-095, or equivalent
Oil Pump Gears Retainer tool No. LRT-12-090, or equivalent
Timing Cover Oil Seal Replacer tool No. LRT-12-089, or equivalent
Valve Guide
Drift Remover tool No. LRT-12-037, or equivalent
Drift Replacer tool No. LRT-12-038, or equivalent
Distance Piece tool No. LRT-12-055, or equivalent
Valve Seat Cutters Basic Handle Set tool No. LRT-12-501, or equivalent
Valve Seat, Adjustable Pilot tool No. LRT-12-503, or equivalent
Valve Seat, Adjustable Cutter tool No. LRT-12-517, or equivalent
Valve Guide Distance Piece tool No. LRT-12-515, or equivalent
Wrist Pin Remover/Replacer tool No. LRT-12-013, or equivalent
Adaptor tool No. LRT-12-126/1, or equivalent
Adaptor tool No. LRT-12-126/2, or equivalent
Wrist Pin Parallel Sleeve tool No. LRT-12-126/3, or equivalent
Valve Spring Compressor tool No. LRT-12-034, or equivalent