Operation CHARM: Car repair manuals for everyone.
Home >> Land Rover >> 2000 >> Range Rover (LP) V8-4.0L >> Repair and Diagnosis >> Transmission and Drivetrain >> Transfer Case >> Service and Repair >> Procedures >> Transfer Gearbox Overhaul >> Front Output Shaft Drive Flange Replacement

Front Output Shaft Drive Flange Replacement






REMOVAL
1. Using LRT-51-003 to restrain front output shaft drive flange, remove and discard nut securing drive flange to front output shaft.
2. Collect washer and seal.





3. Using LRT-99-500 if necessary, remove drive flange from front output shaft.

INSTALLATION
1. Clean running surface of drive flange. Ensure all traces of rubber are removed.

CAUTION: Do not use a metal scraper as this may damage sealing surface.

2. Install drive flange to front output shaft.
3. Install seal, washer and new nut to front output shaft.
4. Using LRT-51-003 to restrain drive flange, tighten nut to 220 Nm (162 ft. lbs.).
pro multis · About Operation CHARM