Front Output Shaft Oil Seal

REMOVAL
1. Remove front output shaft drive flange.





2. Using a flat bladed screwdriver free of rough edges, ease front output shaft oil seal from front casing.

CAUTION: Do not mark sealing surface of front casing.

3. Remove oil seal.

INSTALLATION
1. Clean sealing area of front casing and running surface of front drive flange. Ensure all traces of rubber are removed.

CAUTION: Do not use a metal scraper as this may damage sealing surfaces.

2. Lubricate sealing faces of new seal with clean gearbox oil.





3. Using LRT-41-013 install front output shaft oil seal to front casing. Ensure that seal is square to casing bore.
4. Install front output shaft drive flange.