Instrument Binnacle

Service repair no - 88.20.02

Remove
1. Remove covers from screws securing fascia closing panel.
2. Remove 4 screws, release fascia closing panel.
3. Disconnect drivers lap vent duct. Remove fascia closing panel.







4. Remove 4 screws securing instrument binnacle to fascia.







5. Release binnacle from fascia. Disconnect fuel filler flap release switch multiplug.
6. Remove binnacle.







Refit
7. Position binnacle.
8. Connect multiplug to fuel filler flap release switch. Align to fascia.
9. Fit screws securing instrument binnacle to fascia.
10. Position fascia closing panel. Connect drivers lap vent.
11. Align closing panel. Secure with screws.
12. Fit screw covers.