P0336

DTC P0336
Crank sensor tooth fault (flywheel teeth) Drive cycle A:Signal implausible.

Possible causes by suggested order of priority:
^ Physical damage to crank sensor or sensor wheel.
^ Crank sensor fault.
^ Crank sensor mounting position incorrect.
^ Use of incorrect materials in crank sensor or wheel mountings.
^ Crankshaft sensor or connector C168 water ingress.

Physical Damage To Crank Sensor Or Sensor Wheel.
CHECK THE FOLLOWING:
^ Inspect crankshaft sensor for evidence of damage.
^ Inspect crankshaft sensor wheel for deformed or missing teeth.
POSSIBLE FAULTS
^ Damaged crankshaft sensor.
^ Damaged crankshaft sensor wheel.

Crank Sensor Fault.
CHECK THE FOLLOWING:
^ Check crank sensor by substitution with a known good component.
POSSIBLE FAULTS
^ Crankshaft sensor shorted turn fault.
^ Crankshaft sensor low output fault.

Crank Sensor Mounting Position Incorrect.
CHECK THE FOLLOWING:
^ Check crank sensor mounting position.
POSSIBLE FAULTS
^ Crankshaft sensor mounting damaged.
^ Crankshaft sensor mounting incorrectly fitted.

Use Of Incorrect Materials In Crank Sensor Or Wheel Mountings.
CHECK THE FOLLOWING:
^ Check for any repairs made to sensor mounting with unauthorised parts.
^ Check correct bolts used for crankshaft wheel mounting.
POSSIBLE FAULTS
^ Crankshaft sensor mounting incorrect.
^ Crankshaft sensor wheel fitted with incorrect bolts.

Crankshaft Sensor Or Connector C168 Water Ingress.
CHECK THE FOLLOWING:
^ Check connector C168 for water ingress or contamination.
^ Check crankshaft sensor for water ingress.
^ Check crank sensor by substitution with a known good component.
POSSIBLE FAULTS
^ C168 water ingress.
^ Crankshaft sensor water ingress.