License Plate Lamp: Service and Repair

Housing - Number Plate Lamp

Service Repair No - 86.40.98

Remove
1. Remove tail door latch and motor.





2. Disconnect lamps multiplug.
3. Remove 2 nuts securing housing to door.
4. Carefully release and remove Land Rover badge from housing.
5. Remove bolt securing housing to door.
6. Remove housing from door.





7. Remove housing seal.
8. Remove 4 screws securing lamps to housing.
9. Disconnect 4 Lucar connectors from lamps.
10. Remove lamps and lamp seals.
11. Remove lamp harness from housing.
12. Remove 4 speed nuts from housing.

Refit
1. Fit 4 speed nuts to housing.
2. Fit lamp harness to housing.
3. Fit lamps and lamp seals.
4. Connect 4 Lucar connectors to lamps.
5. Fit 4 screws securing lamps to housing.
6. Position seal to housing.
7. Position housing and seal to tail door and secure with bolt tightened to 3 Nm (2.2 ft. lbs.).
8. Fit Land Rover badge to number plate lamp housing.
9. Fit nuts to number plate housing and tighten to 3 Nm (2.2 ft. lbs.).
10. Connect lamps multiplug.
11. Fit tail door latch and motor.