Maximum Signal

Crankshaft Sensor A Circuit Fault

P0650 - MIL output drive circuit fault.: Last occurrence - maximum signal

Possible causes:
1. Connectors C0606, C1544.
2. Harness integrity.
3. Crankshaft sensor location.
4. Crankshaft sensor.

1. Connectors C0606, C1544.
CONNECTOR
Check for connector not correctly latched, backed out pins, damaged pins, corroded pins

2. Harness integrity.
CIRCUIT_INTEGRITY
Check for open circuit, short circuit to ground, supply or other circuit, damaged or unlatched connector, intermediate connectors or headers

3. Crankshaft sensor location.
No detail available for this fault

4. Crankshaft sensor.
No detail available for this fault