P0741

Electronic Automatic Transmission Torque Converter Clutch Monitor.

P0741 - Mechanical torque converter monitor fault: Plausibility fault

Possible causes:
1. Connectors C1835, C0244.
2. Circuit integrity C1835/23 (U) - C0244/5 (U).
3. Circuit integrity C1835/33 (S) - C0244/6 (S).
4. Gearbox Turbine Speed Sensor.
5. Torque Converter Clutch.
6. Electronic Automatic Transmission ECU.

1. Connectors C1835, C0244.
CONNECTOR
Check for connector not correctly latched, backed out pins, damaged pins, corroded pins

2. Circuit integrity C1835/23 (U) - C0244/5 (U).
CIRCUIT_INTEGRITY
Check for open circuit, short circuit to ground, supply or other circuit, damaged or unlatched connector, intermediate connectors or headers

3. Circuit integrity C1835/33 (S) - C0244/6 (S).
CIRCUIT_INTEGRITY
Check for open circuit, short circuit to ground, supply or other circuit, damaged or unlatched connector, intermediate connectors or headers

4. Gearbox Turbine Speed Sensor.
No detail available for this fault

5. Torque Converter Clutch.
No detail available for this fault

6. Electronic Automatic Transmission ECU.
No detail available for this fault