P1630

Throttle Position Control Error.

P1630 - Throttle position control error.: Last occurrence - plausibility

Possible causes:
1. Connectors C0606, C0175.
2. Harness Integrity.
3. Electronic Throttle actuator.
4. V8 Engine Management System ECM.

1. Connectors C0606, C0175.
CONNECTOR
Check for connector not correctly latched, backed out pins, damaged pins, corroded pins

2. Harness Integrity.
CIRCUIT_INTEGRITY
Check for open circuit, short circuit to ground, supply or other circuit, damaged or unlatched connector,intermediate connectors or headers

3. Electronic Throttle actuator.
No detail available for this fault

4. V8 Engine Management System ECM.
No detail available for this fault