P1709

Transfer Box Controller Signal Fault

P1709 - Transfer box controller signal fault.: Last occurrence - signal fault

Possible causes:
1. Connector C0331, C0862.
2. Transfer box control system.

1. Connector C0331, C0862.
CONNECTOR
Check for connector not correctly latched, backed out pins, damaged pins, corroded pins

2. Transfer box control system.
- There is a transfer box signal fault. Check the transfer box system for faults.
- Use Real Time Monitoring to monitor the transfer box range change signal.
- This fault is raised if the selected transfer box range (low or high) is selected and is different from the current range for more than one minute.