Antenna - Rear Wheel - Tyre Pressure Monitoring (TPM) System

Antenna - Rear Wheel - Tire Pressure Monitoring (TPM) System

Remove
1. Using jack Raise vehicle and support with stands.


WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.







2. Remove 5 nuts securing road wheel, remove wheel.
3. Remove 2 bolts securing antenna, disconnect multiplug and remove antenna.

Refit
1. Position and fit bolts to secure antenna.
2. Conned multiplug to antenna.
3. Fit road wheel and tighten nuts to 140 Nm (103 lbf.ft).
4. Remove stands and lower jack.