Air Cleaner Housing: Service and Repair

Air Cleaner Housing


Service repair no - 19.10.01


Remove

1. Remove air cleaner element.







2. Remove both securing air cleaner lower housing.







3. Release clip securing air intake pipe to lower air cleaner housing.
4. Remove lower air cleaner housing.


NOTE: Do not carry out further dismantling if component is removed for access only.


5. Remove mountings from lower air cleaner housing.

Refit

1. Fit mountings to lower air cleaner housing.







2. Fit lower air cleaner housing connect to air intake pipe and tighten securing bolt.


NOTE: Make sure that the air intake pipe is located into the lugs of the lower air filter housing before the lower air filter housing is fully seated onto its mountings.


3. Fully seat air intake pipe securing clip to lower air cleaner housing.
4. Fit air cleaner element.