Environmental Box ('E' Box)

Environmental Box ('E' Box)

Service repair No - 86.70.18

Before disconnecting the battery ensure all text and cautions in the battery disconnection section are observed.

Remove
1. Disconnect battery earth lead.







2. Remove 10 Allen screws securing 'E' box cover and remove cover.







3. Depress clip and release fuse block from mounting.
4. Disconnect fuse block assembly from multiplug.
5. Depress clips and remove fuse block cover.
6. Remove fuse.

Refit
1. Fit fuse and secure fuse block cover.
2. Connect multiplug to harness.
3. Fit and secure fuse block to mounting.
4. Fit 'E' box cover and tighten Allen screws to 2 Nm (1.5 lbf.ft).
5. Connect battery earth lead.