Headlamp Washer Spray Nozzle: Service and Repair

Jet - Washer - Headlamp

Service Repair No - 84.20.08

The procedure to remove the headlamp washer jet on 03MY vehicles is detailed in the front bumper finisher job.

Remove
1. Remove retaining screw cover from jet housing.
2. Remove screw securing jet to bumper.
3. Release jet and withdraw sufficiently to gain access to washer tube. Disconnect tube from jet and remove jet.

Refit
1. Connect jet to washer tube, ensuring it is pushed fully home.
2. Locate jet in bumper, retain with screw and fit screw cover.