Receiver - Fuel Burning Heater (FBH)

Receiver - Fuel Burning Heater (FBH)

Service repair No - 80.40.02

Remove
1. Disconnect battery earth lead.
2. Remove access panel from load space RH trim casing.
3. Remove warning triangle.







4. Remove cable tie securing harness.
5. Release 2 straps securing harness.
6. Remove 3 bolts securing fuse box to body.







7. Loosen nut and disconnect coaxial cable.
8. Disconnect multiplug from receiver.
9. Remove nut securing receiver and remove receiver.

Refit
1. Fit receiver and secure with nut.
2. Connect multiplug to receiver.
3. Fit coaxial and tighten nut to 2 Nm (1.5 lbf.ft).
4. Align fuse box and tighten bolts to 6 Nm (4.4 lbf.ft).
5. Align and secure harness.
6. Fit and secure warning triangle.
7. Fit access panel.
8. Connect battery earth lead.