Stalk - Rear Seat Belt - LH - 5 Door

Stalk - Rear Seat Belt - LH - 5 Door

Service Repair No - 76.73.32

Remove
1. Fold rear seat forward.







2. Remove 3 screws from end cover and remove cover from seat hinge.
3. Remove 4 Torx bolts from seat lock down catch and remove catch assembly.
4. Remove Torx bolt from seat belt buckle and remove buckle.

Refit
1. Fit buckle to catch assembly and tighten Torx bolt to 32 Nm (24 lbf.ft).
2. Fit catch assembly to seat and tighten Torx bolts.
3. Fit catch assembly to seat, fit Torx bolts but do not tighten at this stage.
4. Fold seat down and check that seat unfolds on lock down bar correctly. Adjust catch assembly if required.
5. Tighten catch Torx bolts to 32 Nm (24 lbf.ft).
6. Recheck seat fold.
7. Fit end cover and tighten screws.
8. Reposition rear seats.