Brake Pedal and Bracket
Brake Pedal and BracketService Repair No - 70.35.03
Removal
1. Remove the headlamp switch.
2. Remove the stoplamp switch.
3. Remove the instrument panel access panel.
^ Release the 2 clips.
4. Remove the brake pedal bracket.
^ Release the wiring harness clip.
^ Remove the 4 Torx bolts.
5. Remove the brake pedal clevis pin.
^ Remove the clip.
6. Release the stoplamp wiring harness.
^ Release the 2 clips.
7. Remove the brake pedal assembly.
^ Remove the 6 nuts.
^ Position the brake booster forward to aid the removal of the brake pedal assembly.
Installation
1. Install the brake pedal assembly.
^ Position the brake booster to the brake pedal bracket.
^ Tighten the nuts to 25 Nm (18 lb.ft).
2. Secure the wiring harness.
^ Secure the clips.
3. Install the brake pedal clevis pin.
^ Install the clip.
4. Install the brake pedal bracket.
^ Tighten the Torx bolt to 10 Nm (7 lb.ft).
^ Secure the wiring harness.
5. Install the instrument panel access panel.
^ Secure with the clips.
6. Install the stoplamp switch.
7. Install the headlamp switch.