Instrument Cluster

Instrument Cluster

Service Repair No - 80.20.01.99

Removal

1. Fully extend the steering column for access.
2. Disconnect the battery ground cable.
3. Remove the steering wheel.
4. Remove the headlamp switch trim panel.
5. Remove the instrument panel access panel.
^ Release the 2 clips.





6. Remove the steering column upper shroud.
^ Release the 6 clips.





7. Remove the steering column lower shroud.
^ Remove the 3 Torx screws.
^ Disconnect the electrical connector.





8. Remove the steering column side trim panel.
^ Release the 4 clips.





9. Disconnect the 2 electrical connectors from the steering column multifunction switches.





10. Disconnect the 2 electrical connectors from the clockspring.





11. Remove the steering column switch assembly.
^ Remove the 4 Torx bolts.





12. Remove the steering column gaiter panel.
^ Remove the 2 Torx screws.
^ Release the 2 clips.





13. Remove the instrument cluster.
^ Remove the 2 Torx screws.
^ Disconnect the electrical connector.





Installation

1. Install the instrument cluster.
^ Connect the electrical connector.
^ Tighten the Torx screws.
2. Install the steering column gaiter panel.
^ Secure with the clips.
^ Tighten the Torx screws.
3. Install the steering column switch assembly.
^ Tighten the Torx bolts to 3 Nm (2 lb.ft).
4. Connect the clockspring and multifunction switch electrical connectors.
5. Install the steering column side trim panel.
^ Secure with the clips.
6. Install the steering column shrouds.
^ Connect the electrical connector.
^ Tighten the Torx screws.
^ Secure the clips.
7. Install the instrument panel access panel.
^ Secure with the clips.
8. Install the headlamp switch trim panel.
9. Install the steering wheel.
10. Connect the battery ground cable.