Fine Straightening With an Aluminium Hammer and A Universal Dolly

Fine Straightening With An Aluminium Hammer And A Universal Dolly





^ Sliding hammer If the damaged panel is only accessible from the outside, use a sliding hammer to pull it back into shape. The discs or studs needed to mount the sliding hammer are welded onto the bare surface. Dents in the panel can be flattened out using controlled application of the sliding hammer.
^ If the damaged panel is only accessible from the outside, use a sliding hammer to pull it back into shape. The discs or studs needed to mount the sliding hammer are welded onto the bare surface. Dents in the panel can be flattened out using controlled application of the sliding hammer.