Campaign - Incorrect Climate Control Module (Canada)
No: SB013CIssue: 1
Date: 08 Jul 2005
SECTION:
SERVICE ACTION: Incorrect Climate Control Panel Installed
AFFECTED VEHICLE RANGE:
Range Rover Sport (LS) Canada ONLY VIN: 6A903229 to 6A910757
CONDITION SUMMARY:
INCORRECTLY SPECIFIED CLIMATE CONTROL PANELS
Situation:
Some early importation Canadian specification vehicles have incorrect Climate Control panels for the market. The front panel has been fitted with Fahrenheit temperature dials instead of the correct Celsius dials.
PARTS:
WARRANTY:
NOTE:
Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only. Always refer to DDW to obtain the latest repair time.
Warranty claims should be submitted quoting program code B013 together with the applicable option code from the table.
As option codes are used, there is no requirement to enter parts or labor. These are repeated here for information only.
Normal warranty policy and procedures apply.
REPAIR PROCEDURE
REPLACE HEVAC CONTROL UNIT
NOTE:
GTR lookup sequence is as follows:
GTR Home > NAS > Service Information/ LS Range
Rover Sport/2006 > Workshop Manuals > Range
Rover Sport 2005 Workshop Manual > Bookmark
"412-04: Control Components" > Link "Climate
Control Assembly"
1. On affected vehicles, refer to GTR section 412-04 and remove the Climate Control unit as follows. (Figure 1)
Follow WSM procedures to remove trim for access.
Remove the 4 Torx screws.
Disconnect the 4 electrical connectors.
2. Install the new climate control assembly with correct
Celcius labeling as follows:
^ Connect the electrical connectors.
^ Tighten the Torx screws.
^ Complete dash panel trim assembly following WSM procedures.
3. Using T4 WDS configure the new Climate Control Assembly as follows:
^ Select the Configuration icon from the top of the screen.
^ Select "Module Programming."
^ Select "Configure New Modules."
^ Select "Heating ventilation and air conditioning control module."
^ Follow on-screen instructions.
4. Claim correct option for vehicle specification and repair performed.
Disclaimer