Headlamp Operation

Headlamp Operation

The lamps contained within the headlamp assembly have differing functionality depending on the function selected.

The low beam headlamps are switched on when the ignition switch is in the ignition position (II) and:
^ the lighting control switch is the headlamp position
^ the lighting control switch is in the 'AUTO' position and a 'lights on' signal is received by the LCM from the rain/light sensor.

The low beam headlamps can also be operated by the headlamp delay feature.

The high beam headlamps are switched on when the ignition switch is in the ignition position (II) and:
^ the low beam headlamps are selected on in the headlamp position or the headlamps are activated by the AUTO feature and the left hand steering column multifunction switch is pushed forward, away from the driver.
^ the headlamp flash function is operated by pulling the left hand steering column multifunction switch towards the driver.